Rubber sheeting making machine 9inch

6 Inch Silicone Mixing Machine Specifications

1. Equipment model: YX-160

2. Roller diameter: 160mm/6in

3. Roll surface width: 500mm

4. Roller spacing: 1mm-10mm

5. Spacing display: mechanical dial

6. Roller speed ratio: 1:1.25

7. Safety device: contact emergency stopper

8. Number of safety devices: multiple

9. Front roller line speed: 18r/min

10. Mixing capacity: 1-5kg

11. Receiving device: SUS304 stainless steel tray

12. Special functions: emergency stop with brake reversal function

13. Roller temperature: water cooling/electric heating (only one option)

14. Roller temperature control: 1.5℃-3.5℃/ normal temperature -200℃

15. Temperature controller: intelligent digital display

16. Motor power: 2.2KW

17. Roller deceleration: constant speed

18. Reducer: line reducer series

19. Power supply: 380V

20. Machine weight: ≈500kg

21. Machine weight: ≈1400*800*1350mm

6 Inch Silicone Mixing Machine Structure Introduction

1. This machine is mainly composed of a body frame. Frame, roller, drive gear and gear reduction. Motor and other components. The roller is made of chilled cast iron. The workpiece surface has high hardness and wear resistance after grinding. The roller is hollow inside and the water system is filled with water. The worm gear reducer is installed next to the frame, and the roller and frame are placed on the upper part of the machine to make the structure compact. Easy to operate.

2. The transmission part of the machine is driven by the hard gear surface reducer motor located outside the machine base, which drives the back roller to turn through the transmission gear, and then drives the front roller to make the front through a pair of speed ratio gear installed on the left end of the roller

3. The last two rollers turn at different speeds in the opposite direction.

The transmission gear has a closed protective device, the machine is equipped with an electrical brake device, when an emergency stop is needed, press the emergency stop switch to brake immediately, and the safety performance is more reliable.

This machine is designed and manufactured by our company. It is mainly used for the mixing equipment of silicone, rubber PVC, PE and PPU materials, which has the characteristics of exquisite structure, safety and convenience, wide applicability and high efficiency.

Note: This model has two functions, (function one/no heating), (function two/electric heating) two options, according to demand.