4 Inch Rubber Mixing Machine

Features

1. The diameter of the mixing machine rollers is 4 inch,The machine has four wheels for easy movement

2. The rubber mixing machine can be application to mix rubber, silicone, pvc, pc and  so on. The rubber mixing machine is a best machine for mixing rubber & silicone colors, vulcanizing agent. You can mix the rubber any colors you want by the mixing machine.

3. This is common mode mixing machine. If your materials are too hard, the mixing machine can be added heat function, please contact us for the best price.

The Specification

 1. The mixing machine model: YX-120
2. Roller diameter: 120mm/3in
3. Roll surface width: 350mm
4. Roller spacing: 1mm-5mm
5. Spacing display: mechanical dial
6. Roller speed ratio: 1:1.25
7. Safety device: contact emergency stopper
8. Number of safety devices: multiple
9. Front roller line speed: 16r/min
10. Mixing capacity: less than 1kg
11. Receiving device: SUS304 stainless steel tray
12. Special functions: emergency stop with brake reversal function
13. Roller temperature: water cooling/electric heating (only one option)
14. Roller temperature control: 1.5℃-3.5℃/ normal temperature -200℃
15. Temperature controller: intelligent digital display
16. Motor power: 2.2KW
17. Roller deceleration: constant speed
18. Reducer: line reducer series
19. Power supply: 380V
20. Machine weight: ≈300kg-500 or less
21. Machine weight: ≈980*430*1100mm

Rubber mixing machine structure introduction

1. This machine is mainly composed of a body frame. Frame, roller, drive gear and gear reduction. Motor and other components. The roller is made of chilled cast iron. The workpiece surface has high hardness and wear resistance after grinding. The roller is hollow inside and the water system is filled with water. The worm gear reducer is installed next to the frame, and the roller and frame are placed on the upper part of the machine to make the structure compact. Easy to operate.

2. The transmission part of the machine is driven by the hard gear surface reducer motor located outside the machine base, driving the back roller to turn through the transmission gear, and then driving the front roller through a pair of speed ratio gear installed on the left end of the roller to make the front and back rollers rotate at different speeds in relative directions.

3. The transmission gear has a closed protective device, the machine is equipped with an electrical brake device, when an emergency stop is needed, press the emergency stop switch to brake immediately, and the safety performance is more reliable.

This machine is designed and manufactured by our company. It is mainly used for mixing equipment of silica gel and rubber. It has the characteristics of exquisite structure, safety and convenience, wide applicability and high efficiency